ShopNotes Magazine

Issue 92 Hardware & Supplies Sources

One-Wall Workshop

One-Wall Workshop

The cabinets for the one-wall workshop on page 16 of ShopNotes No. 92 were obtained from Garage Storage Cabinets. Contact information is below.

To customize the project, you'll also need additional items. The face vise (68888) was ordered from Rockler.  And Woodworker's Hardware carries the wire pulls (A7631326D) we swapped out on the cabinet doors.

If you plan to add lighting, we used 48" GE Premium Direct Wire Fluorescents and 13" GE Advanced Linkable Halogen Lights from local home center.

For the tail vise, you'll need a 9" press screw (13F17.01) and Veritas Bench Pups (05G04.04) from Lee Valley. And if you decide to build the workbench without the tail vise, the Veritas Wonder Pup (05G10.02), along with one bench pup (05G04.03), will make any clamping task simple.

Finally, to paint the cabinets, we used Lady Bug Red (1322) in Eggshell AquaVelvet and Antique Parchment (959) in Satin Impervo. Both are available from a Benjamin Moore dealer. To prepare the surface of the cabinets, we used a fast-drying, oilbased primer with a gray tint.


Lee Valley
Woodworker's Hardware
Garage Storage Cabinets

Buy It Here Don’t have this issue? Buy the project plan now!