ShopNotes Magazine

Issue 96 Hardware & Supplies Sources

Custom Chisel Case

Custom Chisel Case

All the hardware for the chisel cabinet on page 30 of ShopNotes No. 96 was ordered through Lee Valley. Here are the part numbers: 2″ no-mortise hinge (00H51.22); 16mm brass knob (01A02.16); 5mm pin supports (00S10.05); 1/4″ rare-earth magnet (99K31.01); 3/8″ magnet cup (99K32.51); 3/8″ strike washer (99K32.61); and #4 x 3/8″ flathead woodscrews (91Z04.02).


Lee Valley

Buy It Here Don’t have this issue? Buy the project plan now!