ShopNotes Magazine

Updates & Revisions

Here you will find important updates and revisions to the articles and plans published in ShopNotes magazine.


Woodsmith Issue 110 cover image

March 2010
Issue 110

Routing Small Parts
Page 51: Part number for tapered knobs
The Reid Supply part number for the tapered knobs should be BTH-13 to match the 1/4"-20 threads of the machine screws listed in the drawing on page 8. As of June 30, 2010, Reid Supply indicates that part is out of stock. Part BTH-14 can be substituted but that requires changing the machine screw to a 5/16"-18 x 1 1/2". Or use a different knob, such as BTH-170 or DK-984.
Multipurpose Shop Cart
Page 33: Figure 9a
Figure 9a shows the drawer fronts labeled as parts "U" and "V". These should be changed to "V" and "W" respectively.
Page 30: Materials and Hardware
The Side (L) should be 15-1/2" x 13" and the Divider (N) should be 15" x 13" to match the grain direction in the Exploded View.
Page 32: Figures 5 and 5a
Figure 5: The Side (L) should be 15-1/2" x 13" and the Divider (N) should be 15" x 13" to match the grain direction in the Exploded View. Figure 5a: The dimension on the left side should be 4-1/4", not 4-1/2" as shown.
Page 29: Figure 2b
The dimension showing the centerline of the cross-dowel hole should be 2 3/4", not 3 3/4" as originally printed.
Wall-Mounted Miter Saw Station
Page 17: Materials & Hardware
The line item: (2) 2" x 13" Continuous Hinges should instead call for (2) 2" x 11" Continuous Hinges.
Page 16: Figures 1 and 2
The artwork for parts "B" and "H" (Case Top) in Figures 1 and 2 (pages 16 and 17) show the grain direction incorrectly. The grain should be rotated 90 degrees. As such, the Materials & Hardware list on page 17 shows the dimensions for the width and length reversed.