Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in ShopNotes magazine.

September 2012
Issue 125
- 4-in-1 Box-Building Sled
- Page 51: Bolts
- The T-bolts listed in the sources were not used in the project. The project used 1/4"-20 x 1-1/2" long hex bolts, as noted on page 12 of the article. The hex bolts can be found at most hardware stores.
- Shop Short Cuts
- Page 30: Illustration of the spacer
- The drawings do not indicate the width of the plywood spacer. It should be 19 3/8".