Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in ShopNotes magazine.

March 2002
Issue 62
- Carpenter's Toolbox
- Page 16: Figure 1
- Dimensions of piece (Front) printed as 8 1/4" rgh x 27" - 1/2" thick stock but should be 8 1/4" rgh x 28" - 1/2". The materials list on page 16 is correct.
- Box Joint Jig
- Page 9: Figure 9 detail b
- Third step says to drill a 5/16" hole but it should be a 1/4" hole.
- Page 9: Figure 9
- First step says to drill a 1/8" dia. Pilot hole but it should say to drill a 1/16" pilot hole.
- Page 8: Figure 5
- A measurement is missing from the drawing. Piece D - Fence Plate measurement is 3 3/4" x 18".