Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in ShopNotes magazine.
- Heirloom Tool Cabinet
- Page 25: Materials & Hardware
- Two errors. 1. Labels for pieces AA and BB are reversed. Piece AA is the Drawer Bottom, and BB is Drawer False Front. 2. The measurement of piece BB - Drawer False Fronts is incorrect. It is printed as 3/4 x 4 3/4 - 13 13/16 but it should be 3/4 x 3 3/4 - 13 13/16. (The drawings showing this piece are correct.)
- Router Jointer
- Page 34: Fence Hole Layout drawing
- A measurement is missing. A 3/8" diameter hole is indicated in the lower left area of the drawing; the drawing should indicate that this hole is 1" up from the lower edge.
- Page 37: Figure 4
- The dimensions of piece J - Guard Mounting Plate are printed incorrectly. The measurements should be 5" x 6 1/2" - 1/2" ply.