Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in ShopNotes magazine.
November 2005
Issue 84
- Classic Cabinet-Base Workbench
- Page 22: Figure 7
- A measurement is missing from the Drawer Front. The knobs should be placed 4" in from each edge.
- Page 23: Figure 9
- The location of the knobs on the doors was omitted from the drawing. They are located 6 7/8" from the top of the door panel.
- Page 18: Instructions for Adding the Rails
- The text states that the legs are connected by a pair of 1 1/2" thick rails, but the rails are actually 1 3/4" thick.
- Page 18: Figure 1
- 3 corrections on on piece A (leg). 1. The width of the mortise is printed as 1/2" but it should be 3/4". 2. The location of the mortise should be 1/2" from the front edge. 3. The location of the mortise back edge is printed as 3/4" but it should be 1 1/4".