ShopNotes Magazine

Updates & Revisions

Here you will find important updates and revisions to the articles and plans published in ShopNotes magazine.


Woodsmith Issue 86 cover image

March 2006
Issue 86

Thickness Sander
Page 31: Materials list
(Clarification) Piece H (Roller End Plugs) should be cut to fit inside the PVC pipe. There may be some variation in the actual dimensions of the PVC. The instructions on page 32 mention the need to cut to fit, but the materials list states a specific size.
Page 31: Materials & Hardware
Two corrections. 1. Part U dimensions should be 4 5/8 x 6 1/2 - 3/4, not 4 9/16 x 6 1/2 - 3/4. 2. The list indicates that you need a 6" x 48" sanding belt but it should be 16" x 48".
Page 37: Figure 10
Part U dimensions printed as 4 1/16" x 6 1/2" but should be 4 5/8" x 6 1/2".
Page 31: Figure 2 detail b
The measurement between piece F - Height Adjustment Support and piece G - Rub Block is printed as 2 3/4" but it should be 2"