Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in ShopNotes magazine.
- Portable Planer Stand
- Page 18: Figure 1
- On the lower portion of piece A, the 8" measurement should be from the bottom of the piece up to the lower edge of the dado, not to the upper edge of the dado as drawn.
- Tool Storage
- Page 25: Figure 1
- On piece B (bottom) the measurements from the edges to the dadoes is printed incorrectly. From left to right: measurement printed as 12 1/4" but should be 13"; measurement printed as 9 1/4" should be 10".