Table of Contents
Readers' Tips4
Our readers offer their own shop-tested tips dealing with some of the most common woodworking problems.
Updates
-
Page 4: Miter Gauge Extension (art and copy)
The notch on the extension bar nearest the miter gauge should be located on the upper edge of the bar. The text incorrectly states that both notches are on the lower edge.
Lathe Disk Sander6
It's easy to convert your lathe into a disk sander. This shop-made tool features a large sanding disk that removes stock quickly and a tilting table to support the workpiece.
Veneering Small Panels12
From making crips, clean cuts in veneer to gluing and clamping it in place, these helpful tips show you how to apply veneer to small, hardboard panels.
Full-Mortise Lock14
There's no mystery to installing a full-mortise lock. All you need is a little patience, a careful layout, and our step-by-step instructions.
Cabinetmaker's Tool Chest16
This figured maple tool chest is constructed of simple frame and panel assemblies. With seven drawers and storage under the lid, it's designed to hold your favorite hand tools.
Table Saw Dust Collection28
Get the most out of your dust collector. Together with a few scrap pieces of material, you can quickly create an efficient dust collection system for your table saw.
Updates
-
Page 29: Figure 2
Dimensions of Sliding Plate C should be 4 5/8" x 7" - 3/4" stock, not 4" x 7" - 3/4" as originally printed.
Tool Talk30
Tips and talk about tools of our trade. In this issue, we look at a micro-adjustable edge guide that attaches to a router.
Scenes from the Shop32