One day, while blowing the sawdust off my cordless tool chargers, I decided I needed to come up with a charging station that would organize the chargers as well as keep the dust off of them. My solution is a simple box that mounts to the underside of any shelf or cabinet. The back of the case is hinged to allow the box to drop down (photo above). Hanging Box. The charging station parts are joined together with a series of rabbets. A continuous hinge connects the back to the bottom and the back closes into rabbets on the sides. The back of the case is fastened to the underside of a cabinet with pocket screws. A hook and eye latch holds the charging station closed (inset photo). A small chain attached to the inside of the station and the cabinet supports the station when it’s opened.